Bioreader

Great algorithm, user friendly

A powerful, small fingerprint reader. It can be mounted in the door leaf, next to the door or flush mounted on the wall. The control unit can be mounted inside the door leaf or on the DIN rail in a fuse box.

Bioreader is available in two versions: R5BR1 for flush mounting or R5BR2 with a black decorative frame.

Capacitive sensor

Is always waiting for the fingerprint. Just place the finger on the sensor and the door will open.

multi-color LED

LEDs in different colors indicate the status of the Bioreader.

čitalnik prstnih odtisov

Unlocks the door and switches off the alarm

By utilizing it's two relay outputs, Bioreader can unlock the door and/or control another function (e.g. alarm, garage door, etc.)

Mounting on the door leaf or on the wall

There are different options available: with a control unit for door leaf mounting or a control unit for the DIN rail in a fuse box.

Bioreader is a small fingerprint reader with a stainless steel front surface. There are no buttons or moving parts on it's casing. Functions are being performed by means of a remote control when combined with a DIN rail control unit or by means of functions buttons when combined with a door leaf integrated control unit. Color LEDs and a beeper indicate the status of Bioreader.

It is simple to operate with Bioreader as it is primarily intended for access control where there are not many users but it is being used on a daily basis.

The control unit which incorporates the relay outputs for unlocking the door and performing additional functions (e.g. alarm triggering, garage door opening) is safely integrated in the door leaf or mounted on the DIN rail in a fuse box. This makes it impossible to trigger the relays from the outside. Bioreader was primarily designed to be installed in the door leaf but it can also be flush mounted on the wall or on the stainless steel holder.

Bioreader operates on a concept of encrypted communication between the fingerprint reader and control unit (where relay outputs are). The control unit is always mounted on the safe side - inside the door leaf or in the fuse box. Encrypted communication prevents triggering of relays from the outside the door.

  • R5BR1 dimensions: 79,3 x 37,2 mm
  • R5BR2 dimensions: 79,3 x 40,2 mm
  • Administrator slots: 3
  • Fingerprint capacity: 1000
  • Relay outputs: 2
  • Sensor type: area capacitive with 3D imaging
  • Hacking protection: 256-bit encryption
  • The finger was pressed on the sensor too harshly or too gently. The finger should be pressed on the surface of the sensor with normal strength.
  • The surface of the fingerprint pressed on the sensor was too small. A larger surface of the fingerprint should be pressed on the sensor.
  • The fingerprint database is full. You will be able to add a new fingerprint after you  delete one of the existing ones.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • For troubleshooting regarding children, the elderly and damaged fingerprints see the last tab.
  • The finger was pressed on the sensor too harshly or too gently. The finger should be pressed on the surface of the sensor with normal strength.
  •  The surface of the fingerprint pressed on the sensor was too small. A larger surface of the fingerprint should be pressed on the sensor.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • For troubleshooting regarding children, the elderly and damaged fingerprints read the last tab.
  • The device is not connected to the power supply. Check the wiring for possible damage and check the fuse on which the device is connected. If the device still does not respond, call an authorized repair service.
  • Under strong daylight the white LED might not be visible. Shade the device with your hand.

Device malfunction. Call an authorised repair service.

  • The finger that you used might be programmed to trigger the second relay. Delete the fingerprint first, then enroll it again and assign it to the first relay. The procedure is described in the user manual and in the quick guide.
  • Device or electric lock malfunction. Call an authorised repair service.
  • If a child's fingerprint cannot be enrolled it means that it is either too small or not developed enough. Fingerprints mature around the age of eight.
  • A child's fingerprint was successfully enrolled but after some time it is not recognized anymore. Fingerprints can change a lot in a short time during development phase. Enroll the child's fingerprints again.
  • Elder people can have dry and less elastic skin. This makes fingerprints harder to enroll and to recognize. Users in this group need to moisturize their hands before enrolling and using the device. They can also enroll the same finger more than once. This will make the recognition easier.
  • Manual labour, especially when it involves the use of chemicals and various cleaning liquids, can lead to damaged fingerprints. The quality of fingerprints can be improved by the use moisturizing hand creams and to increase the possibility of success it is recommended to enroll the same fingerprint more than once. In some extreme cases fingerprint are damaged beyond recognition and it makes more sense to use another solution, such as the Touchpad.
TOP