Biohandle

Stainless steel handle with integrated fingerprint reader

available in many shapes and sizes. Control unit is mounted inside the door frame and is available for Aluminium/PVC or wooden doors.

Available with a fingerprint reader on the front or the back side of the handle.

Capacitive sensor

Mounted on the ideal height of the handle enables the user to unlock and open the door at the same time.

Control unit in the door leaf

Fingerprint reader is being programmed by the buttons on the control unit, which is mounted inside the door leaf. Simple, discrete and safe.

ročaj s čitalnikom prstnih odtisov

Unlocks the door and switches off the alarm

By utilizing it's two relay outputs, Biohandle can unlock the door and/or control another function (e.g. alarm, garage door, etc.)

Wide array of dimensions and shapes

Standard Biohandles are available in lengths from 600 to 1800 mm and in a round, square or flat shape.

Today, stainless steel handles are a standard part of any modern European front doors.

Biohandle brand present stainless steel handles with integrated fingerprint readers.

Area capacitive sensor enables users to unlock the door and open them at the same time. The fingerprint reader communicates it's state and operations status by multi-color LEDs. It is being programmed with the help of the buttons on the control unit, which is mounted inside the door leaf. With its two relay outputs, Biohandle can open the front door and perform an additional function (switch the alarm on/off, open garage door, etc.)

REX handle

  • The finger was pressed on the sensor too harshly or too gently. The finger should be pressed on the surface of the sensor with normal strength.
  • The surface of the fingerprint pressed on the sensor was too small. A larger surface of the fingerprint should be pressed on the sensor.
  • The fingerprint database is full. You will be able to add a new fingerprint after you  delete one of the existing ones.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • The device is in the sleep mode. Press one of the buttons to wake it up.
  • For troubleshooting regarding children, the elderly and damaged fingerprints see the last tab.
  • The finger has been pressed on the sensor too harshly or too gently. The finger must be pressed on the surface of the sensor with normal strength.
  • A too small surface of the fingerprint has been pressed on the sensor. A larger surface of the fingerprint must be pressed on the sensor.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • The device is in sleep mode. Press one of the buttons to wake it up.
  • For troubleshooting regarding children, elderly and damaged fingerprints read the last tab.
  • The device is in the sleep mode. Press one of the buttons for 1 second and it will wake up.
  • The device is not connected to the power supply. Check the wiring for possible damage and check the fuse  on which the device is connected. If the device still does not respond, call an authorized repair service.

Device malfunction. Call an authorised repair service.

  • The finger that you used might be programmed to trigger the second relay. Delete the fingerprint first, then enroll it again and assign it to the first relay. The procedure is described in the user manual and in the quick guide.
  • Device or electric lock malfunction. Call an authorised repair service.
  • If a child's fingerprint cannot be enrolled it means that it is either too small or not developed enough. Fingerprints mature around the age of eight.
  • A child's fingerprint was successfully enrolled but after some time it is not recognized anymore. Fingerprints can change a lot in a short time during development phase. Enroll the child's fingerprints again.
  • Elder people can have dry and less elastic skin. This makes fingerprints harder to enroll and to recognize. Users in this group need to moisturize their hands before enrolling and using the device. They can also enroll the same finger more than once. This will make the recognition easier.
  • Manual labour, especially when it involves the use of chemicals and various cleaning liquids, can lead to damaged fingerprints. The quality of fingerprints can be improved by the use moisturizing hand creams and to increase the possibility of success it is recommended to enroll the same fingerprint more than once. In some extreme cases fingerprint are damaged beyond recognition and it makes more sense to use another solution, such as the REX touchpad or the REX bluetooth.

Biohandle operates on a concept of encrypted communication between the fingerprint reader and control unit (where relay outputs are). The control unit is always mounted on the safe side - inside the door leaf. Encrypted communication prevents triggering of relays from the outside the door.

  • Sizes: 600-1800 mm
  • Administrator slots: 3
  • Fingerprint capacity: 1000
  • Relay outputs: 2
  • User interface: 2 buttons
  • Installation method: on the door leaf
  • Sensor type: area capacitive with 3D imaging
  • Hacking protection: 256-bit encription

Biohandle can be produced in a custom length, with polished finish or mat black powder coated finis upon request.

  • The finger was pressed on the sensor too harshly or too gently. The finger should be pressed on the surface of the sensor with normal strength.
  • The surface of the fingerprint pressed on the sensor was too small. A larger surface of the fingerprint should be pressed on the sensor.
  • The fingerprint database is full. You will be able to add a new fingerprint after you  delete one of the existing ones.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • The device is in the sleep mode. Press one of the buttons to wake it up.
  • For troubleshooting regarding children, the elderly and damaged fingerprints see the last tab.
  • The finger has been pressed on the sensor too harshly or too gently. The finger must be pressed on the surface of the sensor with normal strength.
  • A too small surface of the fingerprint has been pressed on the sensor. A larger surface of the fingerprint must be pressed on the sensor.
  • Skin on the finger you're trying to enroll is very dry. Make sure your skin is moist enough.
  • The device is in sleep mode. Press one of the buttons to wake it up.
  • For troubleshooting regarding children, elderly and damaged fingerprints read the last tab.

The device is not connected to the power supply. Check the wiring for possible damage and check the fuse  on which the device is connected. If the device still does not respond, call an authorized repair service.

Device malfunction. Call an authorised repair service.

  • The finger that you used might be programmed to trigger the second relay. Delete the fingerprint first, then enroll it again and assign it to the first relay. The procedure is described in the user manual and in the quick guide.
  • Device or electric lock malfunction. Call an authorised repair service.
  • If a child's fingerprint cannot be enrolled it means that it is either too small or not developed enough. Fingerprints mature around the age of eight.
  • A child's fingerprint was successfully enrolled but after some time it is not recognized anymore. Fingerprints can change a lot in a short time during development phase. Enroll the child's fingerprints again.
  • Elder people can have dry and less elastic skin. This makes fingerprints harder to enroll and to recognize. Users in this group need to moisturize their hands before enrolling and using the device. They can also enroll the same finger more than once. This will make the recognition easier.
  • Manual labour, especially when it involves the use of chemicals and various cleaning liquids, can lead to damaged fingerprints. The quality of fingerprints can be improved by the use moisturizing hand creams and to increase the possibility of success it is recommended to enroll the same fingerprint more than once. In some extreme cases fingerprint are damaged beyond recognition and it makes more sense to use another solution, such as the Touchpad.
TOP